Product name ：ZMC420SCAN
Specifications: galvanometer motion controller (20 motion axes+2 groups galvanometer axes)
ZMC420SCAN is a kind of laser galvanometer motion controller mainly for laser industry, combined with galvanometer control, laser control and motion control. Therefore, it supports hybrid interpolation among pulse / bus / galvanometer axes, and no need of extra hardware, galvanometer marking and trace cutting can be achieved.
It supports up to 20 axes of ECAT/RTEX fieldbus connection, There are many functions it can acheive, such as, linear interpolation, any circular interpolation, space arc, helical interpolation, electronic cam, electronic gear, synchronous follow, virtual axis setting, etc., and real time motion control can be realized through optimized network communication protocol. ZMC420SCAN galvanometer controller is widely applied for marking, cutting, processing of metal or non-metal and other areas.
Galvanometer-axis output mode: XY2-100 protocol, the refresh period is 50us
Support MOVE_OP precision output, it can set switch on or off laser output in advance or delay.
Support 12 channels PWM outputs, and it can set PWM output frequency and duty cycle to control laser energe output.
Motion control of up to 20 axes (4 Pulse axes +EtherCAT / RTEX / Galvanometer / Encoder / Virtual).
Pulse output mode: direction/pulse or double pulse.
Encoder position measurement is supported and can be configured as hand wheel input mode.
Maximum axis output frequency: 10Mhz
Maximum extended IOs can reach 4096 through EtherCAT.
The positive or negative limit signal / origin signal of axis can be configured to any inputs.
The output current can reach 300mA, and with another two 500mA current outputs, which can directly drive some kinds of solenoid valves.
Interfaces: USB Drive, RS485, Ethernet
Linear interpolation of up to 16 axes, interpolation of random, spherical and helical.
Electronic cam, electronic gear, position latch, synchronous follow, virtual-axis, etc.
Support pulse axis/ fieldbus axis/ galvanometer axis mixed interpolation
Support pulse closed loop, pitch compensation and other functions.
Mulit-task and multi-file programming in ZBasic
Various encryption methods to protect customers' intellectual properties.
Power failure detection and power failure storage.
Specification | ZMC420SCAN |
Basic Axes | 20 |
Max Axes | 20 |
Basic Axis Type | EtherCAT/RTEX/4 differential pulse axis(outputs can be configured with 6 singel-port pulse axes) / 4 Galvanometer-axis |
Inner IOs | 24 Inputs 12 Outputs (all channels with overcurrent protection), each differential pulse-axis has 1 in and 1 out. |
Max IOs | 4096 Inputs 4096 Outputs |
PWM | 12 (output frequency: 1Mhz) |
Inner ADDA | 2 ADs,2 DAs (0-10V) |
Max ADDA | 256 ADs,128 DAs |
Pulse Resolution | 64 |
Encoder Resolution | 64 |
Speed Resolution | 64 |
Max Pulse Speed | 10Mhz |
Axis Motion Buffer | 4096 |
Array Space | 640000 |
Procedure Space | 8000Kbyte |
Flash Sace | 256MByte |
Power Supply | 24V DC(power is within 10W,no need of fan cooling),IO load is not included. |
Communication | RS232,RS485,Ethernet,USB Drive,CAN, EtherCAT,RTEX |
Size | 216*144mm |
Features
Parameters
System Architecture
Download